blocked

Author Topic: Need AGA T2 Help  (Read 3155 times)

CalVic

  • Jr. Member
  • **
  • Posts: 46
  • Liked: 42
  • Likes Given: 19
Re: Need AGA T2 Help
« Reply #15 on: November 13, 2013, 02:12:55 PM »
Thanks :)

Well I managed to get the Ohms down to 1.6 by accident.

Forgot to tighten the assembly after disassembling it, So instead of pulling the top cap off to offset the hole I tried twisting it and it twisted the wick. I have no idea if I now have hot spots or now since the wick is wet, but it seems to be producing the same taste and vapor, So I'll continue use and see how it goes :)
1. Kanger ProTank II | SmokTech SID [Donated to a friend]
2. AGA T2 | Nemesis Mod
3. Smoktech Pyrex RSST with Top Cap Reducer Mod @ 0.7ohm | Nemsis Mod
3. Mutation X @ 0.2 Ohm | 4Nine Mod