blocked

Author Topic: AGA T2 2Ohm  (Read 990 times)

CalVic

  • Jr. Member
  • **
  • Posts: 46
  • Liked: 42
  • Likes Given: 19
AGA T2 2Ohm
« on: October 26, 2013, 01:05:17 AM »
Hey Folks,

I'm having a AGA T2 being sent my way soon (Thanks Simon!) and I'm just getting things prepared for when it arrives.

I'll be using a Smoktech SID. But this mod won't fire sub ohm. (1.2 I believe is the lowest it will fire). So I'm looking for a target of around 2Ohm.

What wire should I go for and how many wraps should I aim for?

Thanks
Callum,
1. Kanger ProTank II | SmokTech SID [Donated to a friend]
2. AGA T2 | Nemesis Mod
3. Smoktech Pyrex RSST with Top Cap Reducer Mod @ 0.7ohm | Nemsis Mod
3. Mutation X @ 0.2 Ohm | 4Nine Mod

ghoti

  • Forum Host
  • Super Member
  • *****
  • Posts: 1885
  • Twizzled Vaper
  • Liked: 823
  • Likes Given: 942
Re: AGA T2 2Ohm
« Reply #1 on: October 26, 2013, 09:58:13 AM »
Really in my opinion gennies work better at lower ohms.... as theyt need greater heat to start off...

Try going for a 1.7/1.8ohm.... four wraps of 0.2mm kanthal should get you close...


Although if you can manage to get it as close to 1.2ohms as possible, you wont regret it :)
I vape like I used to smoke - I prefer to roll my own :)